1. Главная
  2. Mercedes
  3. ENGINE
  4. OM 906 LA
  5. 902.920
  6. 09 FUEL FILTER AND TURBOCHARGER
  7. 075 TURBOCHARGER

OM 906 LA - 902.920 - 09 FUEL FILTER AND TURBOCHARGER

  • Поз.
    Артикул
    Описание
  • 2
    TURBOCHARGERBORGWARNER, REMAN PART - WHEN YOU ORDER THIS PART PLEASE ADD THE PREFIX"R" IN FRONT OF THE PART NO.
  • 2
    TURBOCHARGERBORGWARNER, USE UP OLD PART NUMBER UP TO ENGINE C1044757, Replaced By: A9020963599
  • 2
    TURBOCHARGER , FIRST EXHAUST STOCK OF OLD PARTS UP TO ENGINE 556662, Replaced By: A9060968699
  • 2
    TURBOCHARGERBORGWARNER, Replaced By: A9020962599
  • 3
    SCREW-IN FITTINGBORGWARNER
  • 4
    STUD THROTTLE HOUSING TO EXHAUST GAS TURBOCHARGER
  • 4
    STUD THROTTLE HOUSING TO EXHAUST GAS TURBOCHARGER
  • 5
    NUT END PIECE TO EXHAUST PIPE
  • 6
    SCREENING PLATE AT EXHAUST PIPE
  • 8
    HEXAGON HEAD BOLT BRACKET TO THROTTLE HOUSING M8X16
  • 11
    AIR LINE BOOST AIR PIPE ON TURBOCHARGR
  • 11
    AIR LINE BOOST AIR PIPE ON TURBOCHARGR
  • 14
    SEAL RING CHARGING AIR LINE TO TURBOCHARGER
  • 17
    CLAMP CHARGING AIR LINE TO TURBOCHARGER
  • 17
    CLAMP CHARGING AIR LINE TO TURBOCHARGER
  • 20
    AIR LINE CHARGE-AIR PIPE ON CHARGE-AIR HOUSING
  • 23
    SEAL RING CHARGE-AIR PIPE ON CHARGE-AIR HOUSING
  • 26
    GUIDE SLEEVE CHARGE AIR PIPE, DISCONTINUED,PART IS NO LONGER REQUIRED
  • 28
    HEXALOBULAR BOLT. SCREW POSITION SENDER UNIT TO CYLINDER CRANKCASE M 6X16
  • 32
    FLANGE CHARGE AIR PIPE, TEMPERATURE SENSOR IS NO LONGER REQUIRED
  • 32
    FLANGE , TEMPERATURE SENSOR IS NO LONGER REQUIRED, Replaced By: A9060980640
  • 33
    GASKET FLANGE TO CHARGE AIR PIPE
  • 38
    HEXAGON HEAD BOLT BRACKET TO BRACKET M8X25
  • 41
    CLAMP INTAKE HOSE TO INTAKE PIPE
  • 44
    HEXAGON HEAD BOLT CLAMP AT SUPPORTING RAIL M 8X30
  • 47
    CLAMP CHARGE-AIR PIPE ON CHARGE-AIR HOUSING
  • 48
    AIR LINE CHARGE-AIR PIPE ON CHARGE-AIR HOUSING
  • 50
    SEAL RING BEARING FLANGE IN TIMING CASE & AIR COMPRESSOR HOUSING,RESP.
  • 50
    SEAL RING THRUST WASHER TO DRIVE SHAFT
  • 65
    PRE-HEATER
  • 65
    PRE-HEATER
  • 68
    CLOSING COVER WITHOUT SEAL,*0843176
  • 68
    COVER WITH GASKET,*0843175, Replaced By: A9049980090, +001A4600980380
  • 69
    GASKET EXPANSION PLUG TO A 904 998 00 90
  • 70
    BRACKET OIL PRESSURE SENDER UNIT,*0615206
  • 70
    BRACKET , Replaced By: A9061530840
  • 71
    HEXALOBULAR BOLT GROUND CABLE TO GENERATOR M6X20
  • 74
    WASHER COVERING TO CAB
  • 78
    BRACKET
  • 80
    HEXAGON HEAD BOLT BRACKET TO BRACKET M8X25
  • 82
    SCREW. HEXAGON HEAD BOLT BUZZER TO WINDOW LEVEL GIRDER M6X25
  • 84
    SCREW BRACKET AND CLAMP M6X20
  • 89
    SENDER UNIT EXHAUST GAS TEMPERATURE
  • 93
    BALL TO PLUG AIR COMPRESSORE OIL BORE,FRONT SIDE
  • 97
    UNION NUT LINE CONNECTION
  • 101
    BRACKET CHARGE AIR PIPE COLD AT CYLINDER HEAD,*0525551
  • 101
    BRACKET CHARGE AIR PIPE COLD AT CYLINDER HEAD
  • 104
    SPACER TUBE CHARGE AIR PIPE COLD AT CYLINDER HEAD
  • 107
    HEXAGON HEAD BOLT BRACKET TO DISTRIBUTOR
  • 110
    HEXAGON HEAD BOLT BRACKET TO BRACKET M8X25
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]