1. Главная
  2. Mercedes
  3. VAN
  4. SPRINTER 410 D,412 D
  5. 904.422
  6. 54 ELECTRICAL EQUIPMENT AND INSTRUMENTS
  7. 085 RELAYS AND CONTROL MODULES IN ENGINE COMPARTMENT

Mercedes A0005458040 - ДЕРЖАТЕЛЬ

SPRINTER 410 D,412 D 904.422
54 ELECTRICAL EQUIPMENT AND INSTRUMENTS - 085 RELAYS AND CONTROL MODULES IN ENGINE COMPARTMENT
  • Поз.
    Артикул
    Описание
  • 8
    SHELL TYPE HANDLE"PMS"
  • 8
    PLUG HOUSING , Replaced By: A0005457381, +001A0005450539, +001A0005458040, +001A0005450471, +001A0005457780
  • 9
    RUBBER RING , Replaced By: A0005450839
  • 10
    BRACKET"PMS"
  • 11
    SCREW , NOT USED
  • 12
    GASKET"PMS"
  • 13
    CONTACT SPRING0.5-1.0 MM2
  • 13
    CONTACT SPRING LESS DETENT,BUT WITH CATCH FOR HOUSING 1.0-2.5 MM2
  • 23
    PIN BUSHING HOUSING CHARGING PRESSURE SENSOR
  • 26
    BOOT THREE-PIN PLUG CONNECTION
  • 29
    CONTACT SPRING0.5-1.0 MM2
  • 29
    CONTACT SPRING , Replaced By: A0115458126
  • 35
    MSA25 CONTROL UNIT IN CASE OF IMMOBILISER, P 614659 R 000001 ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE! PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 35
    CONTROL UNIT FOR LOW-POLLUTION VEHICLES 90KW (MS5), ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE! PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 35
    MSA25 CONTROL UNIT WITH ENGINE SPEED STABILIZATION 75 KW, ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE! PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 35
    MSA25 CONTROL UNIT FOR LOW-POLLUTION VEHICLES IN CASE OF IMMOBILISER CODE-B: MD1 + FZ7(75 KW), ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE! PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 35
    MSA25 CONTROL UNIT WITH ENGINE SPEED STABILIZATION, ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE! PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 35
    MSA25 CONTROL UNIT WITH IMMOBILIZER AND ENGINE SPEED STABILIZATION 75 KW, ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE! PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 35
    MSA25 CONTROL UNIT WITH IMMOBILIZER AND ENGINE SPEED STABILIZATION, ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE! PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 35
    MSA15 CONTROL UNIT IN CASE OF IMMOBILISER, P 614658 ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE! PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 35
    MSA25 CONTROL UNIT FOR LOW-POLLUTION VEHICLES 90 KW (MD1), ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE! PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 35
    CONTROL UNIT FOR LOW-POLLUTION VEHICLES 75 KW(MS5), ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE! PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 35
    MSA25 CONTROL UNIT FOR LOW-POLLUTION VEHICLES 90 KW (MD1), ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE! PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 35
    MSA25 CONTROL UNIT FOR LOW-POLLUTION VEHICLES CODE-B: MD1(75KW), ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE! PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 35
    MSA25 CONTROL UNIT FOR LOW-POLLUTION VEHICLES IN CASE OF IMMOBILISER CODE-B: ML9 + FZ7, ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE! PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 35
    MSA25 CONTROL UNIT , P 614659 R 000001 ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE! THEFT-RELEVANT PART
  • 35
    MSA25 CONTROL UNIT FOR LOW-POLLUTION VEHICLES CODE-B: ML9 - FZ7, ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE! PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 35
    MSA15 CONTROL UNIT , P 614658 ATTENTION!!! SPARE PART MUST BE CODED WITH HAND-HELD TESTER AFTER INSTALLATION IN VEHICLE! PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 35
    MSA25 CONTROL UNIT , THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A0275455132
  • 35
    MSA25 CONTROL UNIT , THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A0275455032
  • 35
    MSA25 CONTROL UNIT , Replaced By: A6021530279
  • 35
    MSA25 CONTROL UNIT , Replaced By: A6021530179
  • 35
    MSA25 CONTROL UNIT , THEFT-RELEVANT PART, Replaced By: A0215455932
  • 35
    MSA25 CONTROL UNIT , THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A0245456232
  • 35
    MSA CONTROL UNIT , Replaced By: A0195456532
  • 35
    MSA25 CONTROL UNIT , THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A0245456332
  • 35
    MSG CONTROL UNIT , Replaced By: A0195456332
  • 38
    COVERING CONTROL UNIT MSA
  • 41
    PIN BUSHING HOUSING ELECTRONICALLY CONTROLLED DISTIBUTION INJECTION SYSTEM (EVE) TO 461 540 62 06
  • 44
    CONTACT SPRING , Replaced By: A0065458926
  • 44
    CONTACT SPRING
  • 47
    PIN BUSHING HOUSINGMSA 25, P 614659 R 000001
  • 47
    SHELL TYPE HANDLEMSA15, P 614658
  • 50
    RUBBER RING ELECTRONICALLY CONTROLLED DISTIBUTION INJECTION SYSTEM (EVE)
  • 53
    SCREW , NOT USED
  • 56
    SEAL RINGTO 000 545 62 40
  • 59
    BRACKET CONTROL UNIT
  • 62
    NUT COVERING TO CAB FIRE WALL
  • 65
    SCREW LICENSE PLATE TO BRACKET
  • 65
    SCREW , Replaced By: N304017006020
  • 68
    WASHER COMPRESSED AIR LINE TO BRACKET
  • 68
    WASHER COMPRESSED AIR LINE TO BRACKET, Replaced By: N000125006449
  • 71
    LOCK WASHER CONTROL LEVER TO INJECTION PUMP LEVER
  • 74
    NUT SPRING-LOADED PUSH ROD
  • 77
    PRE-GLOW TIME RELAYOM602, P 614658
  • 80
    CONTROL UNIT
  • 80
    PRE-GLOW TIME RELAY , Replaced By: A0005453616
  • 80
    PRE-GLOW TIME RELAY , Replaced By: A0285454032
  • 80
    PRE-GLOW TIME RELAY , Replaced By: A0255452932
  • 80
    CONTROL UNIT (PRE-GLOW TIME RELAY), Replaced By: A6489000000
  • 83
    BOOTTO 001 545 97 32,001 545 98 32
  • 86
    FUSE
  • 89
    SCREW STEP SWITCH AM 5X10
  • 92
    WASHER REFLECTOR TO BRACKET
  • 95
    PIN BUSHING HOUSING PRE-GLOW TIME RELAY, 5-POLE
  • 95
    PIN BUSHING HOUSING HEADREST/BACKREST/SEAT-FORE-&-AFT ADJUSTMENT SWITCH, 6-POLE
  • 98
    ROUND PIN BUSHING WITH DETENT AND WITH CATCH FOR HOUSING 2.5 MM2
  • 98
    ROUND PIN BUSHING2.5 MM2
  • 101
    CLUTCH. PIN BUSHING HOUSING SIREN
  • 104
    CONTACT BUSHING , Replaced By: A0085456326
  • 104
    CONTACT BUSHING , Replaced By: A0085456326
  • 104
    CONTACT BUSHING WITH SINGLE-WIRE SEAL 0.5MM2,126373
  • 107
    SPRING WASHER LICENSE PLATE TO BRACKET
  • 110
    NUT SPRING-LOADED PUSH ROD
  • 113
    SCREW , Replaced By: N910105006023
  • 113
    SCREW LEVER TO ENGINE CONTROL SHAFT
  • 119
    LOCK WASHER CONTROL LEVER TO INJECTION PUMP LEVER
  • 122
    NUT SPRING-LOADED PUSH ROD
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]