1. Главная
  2. Mercedes
  3. ENGINE
  4. OM 457 HLA
  5. 457.965
  6. 01 ENGINE HOUSING
  7. 080 CYLINDER HEAD,VALVES,GASKET SET AND CONSTANTLY OPEN THROTTLE VALVE IL. 1

Mercedes A4570100330 - Крышка клапанная

OM 457 HLA 457.965
01 ENGINE HOUSING - 080 CYLINDER HEAD,VALVES,GASKET SET AND CONSTANTLY OPEN THROTTLE VALVE IL. 1
  • Поз.
    Артикул
    Описание
  • 5
    CYLINDER HEAD WITH VALVES AND CONSTANT THROTTLE
  • 5
    CYLINDER HEAD WITH VALVES WITHOUT CONSTANTLY-OPEN THROTTLE VALVE
  • 5
    CYLINDER HEAD WITH VALVES AND CONSTANT THROTTLE, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 5
    CYLINDER HEAD WITH VALVES AND CONSTANT THROTTLE, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART, Replaced By: A4570100721
  • 5
    CYLINDER HEAD WITH VALVES WITHOUT CONSTANTLY-OPEN THROTTLE VALVE, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART, Replaced By: A4570100821
  • 5
    CYLINDER HEAD WITH VALVES WITHOUT CONSTANTLY-OPEN THROTTLE VALVE, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 17
    EXPANSION PLUG PLUG FOR OIL CHAMBER,UNIT PUMP SIDE
  • 17
    EXPANSION PLUG WATER PASSAGE
  • 17
    FILLER CAP CORE HOLE 42 MM
  • 17
    FILLER CAP CORE HOLE 40 MM
  • 17
    FILLER CAP CORE HOLE 42 MM
  • 17
    FILLER CAP CORE HOLE 40 MM
  • 23
    BALL (CHECK VALVE),SECONDARY PUMP
  • 29
    SLEEVE PROTECTIVE SLEEVE
  • 35
    SEAL RING
  • 35
    SEAL RING
  • 41
    VALVE GUIDE CONSTANT THROTTLE FITTING SIZE: 13.20 MM
  • 41
    VALVE GUIDE CONSTANT THROTTLE FITTING SIZE: 13.00 MM
  • 41
    VALVE GUIDE INTAKE AND EXHAUST, FITTING SIZE, 15.20 MM
  • 41
    VALVE GUIDE INTAKE AND EXHAUST,STANDARD 15.00 MM
  • 41
    VALVE GUIDE INTAKE AND EXHAUST, FITTING SIZE, 15.4 MM
  • 41
    VALVE GUIDE , THE OLD PART MUST NO LONGER BE INSTALLED IN THIS PLACE, Replaced By: A4570531230
  • 41
    VALVE GUIDE INTAKE AND EXHAUST, FITTING SIZE, 15.2 MM, Replaced By: A5410532830, +001A0000535358
  • 44
    SEAL RING SEAL IN VALVE GUIDE, THE OLD PART MUST NO LONGER BE INSTALLED IN THIS PLACE, Replaced By: A0000535358
  • 44
    VALVE STEM SEAL SEAL IN VALVE GUIDE
  • 47
    VALVE SEAT RING EXHAUST,FITTING SIZE,+0.4MM
  • 47
    VALVE SEAT RING INTAKE,STANDARD
  • 47
    VALVE SEAT RING EXHAUST,STANDARD 43.09 MM
  • 47
    VALVE SEAT RING EXHAUST,FITTING SIZE,+0.2MM
  • 47
    VALVE SEAT RING EXHAUST,STANDARD 43.09 MM
  • 47
    VALVE SEAT RING EXHAUST,STANDARD 43.09 MM
  • 47
    VALVE SEAT RING EXHAUST,FITTING SIZE, 43.29 MM
  • 53
    EXHAUST VALVE
  • 53
    INTAKE VALVE
  • 53
    INTAKE VALVE
  • 53
    EXHAUST VALVE
  • 59
    VALVE SPRING , RECOMMENDED FOR TAKING ON STOCK
  • 59
    VALVE SPRING
  • 65
    WASHER VALVE SPRING
  • 71
    SPRING RETAINER
  • 77
    VALVE COLLET , EXHAUST STOCK OF OLD PARTS UP TO ENGINE 212290, Replaced By: A5410530226
  • 83
    SEAL HOLDER INTAKE AND EXHAUST VALVES
  • 83
    SEAL HOLDER SEAL IN VALVE GUIDE, Replaced By: A0000535858
  • 83
    VALVE STEM SEAL SEAL IN VALVE GUIDE
  • 89
    COVER CONSTANT THROTTLE TO CYLINDER HEAD
  • 95
    SEAL RING CONSTANT THROTTLE TO CYLINDER HEAD, RECOMMENDED FOR TAKING ON STOCK
  • 101
    VALVE CONSTANT THROTTLE
  • 104
    VALVE SEAT RING CONSTANT THROTTLE FITTING SIZE:21.455 MM
  • 104
    VALVE SEAT RING CONSTANT THROTTLE FITTING SIZE:21.265 MM
  • 104
    VALVE SEAT RING CONSTANT THROTTLE21.065 MM
  • 110
    GUIDE CONSTANT THROTTLE TO CYLINDER HEAD
  • 116
    SPRING CONSTANT THROTTLE TO CYLINDER HEAD
  • 122
    VALVE COLLET CONSTANT THROTTLE TO CYLINDER HEAD
  • 128
    SPRING RETAINER CONSTANT THROTTLE TO CYLINDER HEAD
  • 134
    PISTON WITH SEAL RING
  • 137
    CLAMPING PIECE PISTON COOLING
  • 143
    SCREW
  • 149
    BEARING BRACKET ROCKER ARM
  • 161
    BALL TO PLUG OIL CONNECTION TO AIR COMPRESSOR
  • 167
    ROCKER ARM INTAKE
  • 173
    ROCKER ARM EXHAUST
  • 191
    SET SCREW (SET SCREW)
  • 197
    NUT
  • 203
    WASHER LINE MOUNTING, FROM MODEL YEAR '98017941 DISCONTINUED,PART IS NO LONGER REQUIRED
  • 209
    LOCK RING RELEASE SHAFT,BOTTOM
  • 215
    SCREW
  • 221
    VALVE BRIDGE
  • 224
    PUSH ROD
  • 224
    PUSH ROD
  • 257
    CYLINDER HEAD GASKET
  • 257
    CYLINDER HEAD GASKET , THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A4600160420
  • 263
    SCREW CYLINDER HEAD TO CYLINDER CRANKCASE
  • 263
    SCREW CYLINDER HEAD TO CYLINDER CRANKCASE
  • 269
    NOZZLE HOLDER COMBINATION WITH NOZZLE
  • 269
    NOZZLE HOLDER WITH NOZZLE
  • 275
    O-RING NOZZLE HOLDERS, TOP
  • 281
    SEALING SLEEVE NOZZLE HOLDER TO CYLINDER HEAD, RECOMMENDED FOR TAKING ON STOCK
  • 287
    PIPE SOCKET INJECTION LINE ON NOZZLE HOLDER
  • 287
    PIPE SOCKET INJECTION LINE ON NOZZLE HOLDER, Replaced By: A9060170524
  • 293
    SEAL RING INJECTION LINE ON NOZZLE HOLDER
  • 297
    SCREW NOZZLE HOLDERS
  • 297
    SCREW NOZZLE HOLDERS
  • 309
    CYLINDER HEAD COVER
  • 315
    SEALING SHIM
  • 315
    GASKET , Replaced By: A4570160221
  • 321
    BOLT. SCREW BRACKET TO PUSH ROD CHAMBER COVER
  • 345
    DS CYLINDER HEAD , ORDER ADDITIONALLY: CYLINDER HEAD GASKET
  • 345
    GASKET KIT CYLINDER HEAD, EXHAUST STOCK OF OLD PARTS UP TO ENGINE 102197, Replaced By: A4570108920
  • 345
    GASKET KIT CYLINDER HEAD, EXHAUST STOCK OF OLD PARTS UP TO ENGINE 148864, Replaced By: A4570101021
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]