Поз.
Артикул
Описание
5
STEERING KNUCKLE FRONT LEFT
5
STEERING KNUCKLE FRONT RIGHT
10
SUPPORTING JOINT LEFT AND RIGHT
10
SUPPORTING JOINT LEFT AND RIGHT, Replaced By: A2203330727
15
FRONT WHEEL HUB WITH BEARING
16
TAPERED ROLLER BEARING OUTSIDE, F 125158 EXCEPT CODE 805 ALSO INSTALLED IN VEHICLE TO F 125157 WITH CODE 806
16
TAPERED ROLLER BEARING INSIDE
17
SEAL RING WHEEL HUB
25
NUT FRONT WHEEL HUB TO STEERING KNUCKLE
30
HEXALOBULAR BOLTM6X25
30
SCREW CHARGE AIR PIPE TO ELECTRONIC GAS ACTUATOR M 6X25
35
LOCKING CAP FRONT WHEEL HUB TO STEERING KNUCKLE
40
SPRING CONTROL ARM BOTTOM LEFT & RIGHT, THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A2153300607
40
SPRING CONTROL ARM BOTTOM LEFT & RIGHT, REPLACE AS PAIRS UP TO CHASSIS NUMBER A028009
40
TRANSVERSE CONTROL ARM BOTTOM LEFT
40
TRANSVERSE CONTROL ARM BOTTOM RIGHT
40
SPRING CONTROL ARM BOTTOM LEFT & RIGHT, ONLY REPLACEABLE BY PAIRS, Replaced By: A2153300707
45
BEARING LEFT AND RIGHT, ONLY REPLACEABLE BY PAIRS FOR VEHICLES WITH KIDNEY SHAPED RUBBER MOUNTS REPLACEMENT TO BEIN PAIRS, Replaced By: A2203309107
45
TS SPRING LINK PARTS KIT LEFT AND RIGHT, ONLY REPLACEABLE BY PAIRS
46
BEARING SPRING CONTROL ARM
47
JOINT SPRING LINK TO TORSION BAR, UP TO IDENT NO. A 013598, ALSO ORDER TORSION BAR LINKAGE
47
JOINT LEFT, Replaced By: A2113230068
50
BOLT THRUST ARM TO SUPPORT M14X1.5
50
FITTED BOLT FOR ADJUSTING WORK ONLY M14X1.5
55
SPACER DISK TORQUE STRUT TO FRAME-TYPE INT. SUPP.
60
HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
64
HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
65
STRUT BOTTOM RIGHT
65
STRUT BOTTOM RIGHT, Replaced By: A2203305811
65
STRUT BOTTOM LEFT, Replaced By: A2203305711
65
STRUT BOTTOM LEFT
70
BOLT THRUST ARM TO SUPPORT M14X1.5
70
FITTED BOLT FOR ADJUSTING WORK ONLY M14X1.5
75
SPACER DISK TORQUE STRUT TO FRAME-TYPE INT. SUPP.
80
HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
84
HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
85
TRANSVERSE CONTROL ARM TOP, LEFT
85
TRANSVERSE CONTROL ARM TOP RIGHT
90
BOLT. SCREW OIL FILTER TO CYLINDER CRANKCASE M 10X95
95
NUT EXHAUST PIPE AND PIPE CLAMP TO BRACKET
100
NUT STRAP TO BRACKET
110
TS BOLT PARTS KIT FOR ADJUSTING WORK ONLY