1. Главная
  2. Mercedes
  3. ENGINE
  4. OM 457 HLA
  5. 457.966
  6. 07 INJECTION SYSTEM
  7. 090 FUEL LINES IL. 1

Mercedes A0079974172 - Штуцер топливный сепаратора

OM 457 HLA 457.966
07 INJECTION SYSTEM - 090 FUEL LINES IL. 1
  • Поз.
    Артикул
    Описание
  • 5
    LINE (UNIT PUMP)
  • 5
    LINE (UNIT PUMP), Replaced By: A4570701333
  • 5
    LINE , THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A4570701733
  • 7
    LINE LEAK OIL LINE TO UNIT PUMP, THE OLD PART MUST NO LONGER BE INSTALLED IN THIS PLACE, Replaced By: A4570701638
  • 7
    LINE LEAK OIL LINE TO UNIT PUMP, USE UP OLD PART NUMBERS UP TO ENGINE 183157, Replaced By: A4570701638
  • 7
    LINE LEAK OIL LINE TO UNIT PUMP
  • 8
    LEAK FUEL LINE LEAK LINE TO CYLINDER HEAD
  • 8
    LINE LEAK LINE TO CYLINDER HEAD, Replaced By: A4570702238
  • 8
    LINE LEAK LINE TO CYLINDER HEAD, Replaced By: A4570702338
  • 8
    LEAK FUEL LINE LEAK LINE TO CYLINDER HEAD
  • 9
    LINE LEAK LINE TO CYLINDER HEAD
  • 10
    HOLLOW SCREW FUEL LINES TO SOLENOID VALVE
  • 11
    SEALING RING FUEL LINE TO UNIT PUMP AND CYLINDER HEAD
  • 12
    SEALING RING FUEL LINE TO UNIT PUMP AND CYLINDER HEAD
  • 12
    SEAL
  • 13
    FUEL LINE FROM HAND SUPPY PUMP TO FILTER
  • 13
    LINE FROM HAND SUPPY PUMP TO FILTER, Replaced By: A4570704932
  • 14
    LINE FROM FILTER TO CYLINDER CRANKCASE, THE OLD PART MUST NO LONGER BE INSTALLED, Replaced By: A4570707032
  • 14
    FUEL LINE FROM FILTER TO CYLINDER CRANKCASE
  • 14
    LINE FROM FILTER TO CYLINDER CRANKCASE, PLEASE USE RUBBERIZED CLAMPS FOR INSTALLATION
  • 15
    SCREW. BANJO BOLT AIR RESERVOIR,CONNECTION: "33",4 872664
  • 16
    SEAL RINGTO 006 997 00 72
  • 16
    SEALING RING OIL PRESSURE GAUGE SENDER UNIT
  • 17
    LINE FROM VALVE TO FUEL PUMP
  • 17
    LINE FROM VALVE TO FUEL PUMP
  • 20
    FUEL LINE FROM CONTROL UNIT TO PUMP
  • 20
    LINE FROM CONTROL UNIT TO PUMP, EXHAUST STOCK OF OLD PARTS UP TO ENGINE 181488, Replaced By: A4570704532
  • 23
    INTERMEDIATE PIECE ,*0224955
  • 26
    HOLLOW SCREW FUEL FEED,AT WATER SEPARATOR
  • 26
    SCREW. BANJO BOLT AIR RESERVOIR,CONNECTION: "33",4 872664
  • 27
    HOLLOW SCREW FOUR-CIRCUIT PROTECTIVE VALVE, CONNECTION: "24"
  • 29
    HOLLOW SCREW FUEL LINE TO UNIT PUMP AND CYLINDER HEAD
  • 29
    SCREW. BANJO BOLT AIR RESERVOIR,CONNECTION: "33",4 872664
  • 29
    HOLLOW SCREW FUEL FEED,AT WATER SEPARATOR
  • 29
    HOLLOW SCREW FUEL LINES TO SOLENOID VALVE
  • 30
    HOLLOW SCREW FUEL LINES TO SOLENOID VALVE
  • 32
    SEALING RING OIL PRESSURE GAUGE SENDER UNIT
  • 32
    SEAL RINGTO 006 997 00 72
  • 32
    SEALING RING FUEL LINE TO UNIT PUMP AND CYLINDER HEAD
  • 33
    SEALING RING FUEL LINE TO UNIT PUMP AND CYLINDER HEAD
  • 35
    CLAMP
  • 35
    CLAMP OIL DIPSTICK TO RADIATOR
  • 38
    SCREW BRACKET TO SIDE MEMBER M8X20
  • 38
    CAP BOLT. SCREW BRACKET TO CYLINDER CRANKCASE
  • 47
    FITTING ON INTAKE RADIATOR-CONTROL MODULE,*0000058
  • 47
    FITTING ON INTAKE RADIATOR-CONTROL MODULE
  • 50
    FITTING ,*0591097
  • 53
    CHECK VALVE
  • 62
    VALVE ON INTAKE RADIATOR-CONTROL MODULE,*0000058 RECOMMENDED FOR TAKING ON STOCK TO ENGINE 559826
  • 62
    VALVE ON INTAKE RADIATOR-CONTROL MODULE, FROM ENG.559827
  • 65
    BRACKET LINE MOUNTING
  • 67
    SCREW PICK-UP PLATE BRACKET ON LONGITUDINAL MEMBER M 14X25
  • 68
    LOOM TIE187 X 3.6 MM
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]