Поз.
Артикул
Описание
30
CONTROL UNITMSG, CONTROL MODULE MUST BE FLASHED WITH ATTENDANT FLASHWARE PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
30
CONTROL UNIT ENGINE CONTROL MODULE MSG, CONTROL MODULE MUST BE FLASHED WITH ATTENDANT FLASHWARE
30
CONTROL UNIT ENGINE CONTROL MODULE MSG, FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. J 34001120060515 CONTROL MODULE MUST BE FLASHED WITH ATTENDANT FLASHWARE, Replaced By: A0024463340
70
HEX. ROUND SCREWS. SCREW BRACKET TO SUPPORT M5 X 20
160
BRACKET ON ENGINE CONTROL UNIT FOR WIRING HARNESS
170
BRACKET CONTROL UNIT COVERING
180
ELASTOMER BEARING AT BRACKET
190
HEXALOBULAR BOLT. SCREW BRACKET TO TRANSMISSION M 6X15
902
PLUG SOCKET ME. CONTROL UNIT 96-PIN MLK1.2,N3/10
903
CRIMP RECEPTACLE CONTACT ME. CONTROL UNIT 0.75-1.0 MM2 MLK1.2S,N3/10
903
CRIMP RECEPTACLE CONTACT ME. CONTROL UNIT 0.22-0.5 MM2 MLK1.2S,N3/10
903
CRIMP RECEPTACLE CONTACT ME. CONTROL UNIT 1.5 MM2 MLK1.2S,N3/10
904
PLUG SOCKET ENGINE CONTROL MODULE 58-PIN SLK2.8, MLK1.2,N3/10
905
ELECTRICAL LINE1.5 MM2 SLK2.8, CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS.SOLDER CONNECTOR SLEEVES:TOTAL WIRE CROSS-SECTION: A 001 546 99 41GREEN0.7 -2.4 MM2 A 002 546 00 41RED2.0 -4.0 MM2 A 002 546 01 41BLUE 3.5 -8.0 MM2 A 002 546 11 41YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2
905
FEMALE CONTACT1.5 MM2 MLK1.2,X88/2
905
FEMALE CONTACT WIPER MOTOR 0.22-0.5 MM2 MLK1.2,X88/2