1. Главная
  2. Mercedes
  3. CAR
  4. E 250 BLUETEC
  5. 212.004
  6. 33 FRONT AXLE
  7. 030 STEERING KNUCKLE AND CONTROL ARM

Mercedes A2123300025 - ПОДШИПНИК СТУПИЦЫ КОЛЕСА

E 250 BLUETEC 212.004
33 FRONT AXLE - 030 STEERING KNUCKLE AND CONTROL ARM
  • Поз.
    Артикул
    Описание
  • 10
    STEERING KNUCKLE RIGHT, A 94525720131122 L 04087920131130 V 00279120131130 IMPORTANT: UP TO CHASSIS NUMBER A001281 BALL JOINT MUST ALSO BE EXCHANGED, OBSERVE WIS!
  • 10
    STEERING KNUCKLE LEFT, A 94525620131122 L 04087820131130 V 00279020131130 IMPORTANT: UP TO CHASSIS NUMBER A001281 BALL JOINT MUST ALSO BE EXCHANGED, OBSERVE WIS!
  • 10
    STEERING KNUCKLE LEFT, A 94525720131122 L 04087920131130 V 00279120131130 IMPORTANT: UP TO CHASSIS NUMBER A001281 BALL JOINT MUST ALSO BE EXCHANGED, OBSERVE WIS!
  • 10
    STEERING KNUCKLE RIGHT, A 94525620131122 L 04087820131130 V 00279020131130 IMPORTANT: UP TO CHASSIS NUMBER A001281 BALL JOINT MUST ALSO BE EXCHANGED, OBSERVE WIS!
  • 30
    FRONT WHEEL HUB
  • 40
    SEAL RING
  • 50
    CLAMPING NUT
  • 60
    HEXALOBULAR BOLTM6X25
  • 70
    LOCKING CAP FRONT WHEEL HUB TO STEERING KNUCKLE
  • 200
    STRUT LEFT WITHOUT BEARING, ALSO ORDER BEARING
  • 200
    STRUT RIGHT WITHOUT BEARING, ALSO ORDER BEARING
  • 210
    BEARING STRUT
  • 220
    HEXAGON HEAD BOLT SUPPORT TO FRAME M14X1.5X120
  • 220
    ADJUSTMENT SCREW FOR ADJUSTING WORK ONLY
  • 230
    SPACER DISK TORQUE STRUT TO FRAME-TYPE INT. SUPP.
  • 230
    INDEXING PLATE FOR ADJUSTING WORK ONLY
  • 240
    NUT W FLANGE, BINDING FOR ADJUSTING WORK ONLY
  • 240
    HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
  • 250
    TS ADJUSTMENT SCREW FOR ADJUSTING WORK ONLY
  • 270
    NUT TRANSVERSE CONTROL ARM TO INTEGRAL CARRIER, RIGHT M14X1.5
  • 300
    CROSS MEMBER LEFT
  • 300
    CROSS MEMBER RIGHT
  • 300
    CROSS MEMBER RIGHT
  • 300
    CROSS MEMBER LEFT
  • 310
    JOINT CROSS STRUT, IMPORTANT: UP TO CHASSIS NUMBER A001281 STEERING KNUCKLE MUST ALSO BE EXCHANGED, OBSERVE WIS!
  • 315
    NUT TRANSVERSE CONTROL ARM TO INTEGRAL CARRIER, RIGHT M14X1.5
  • 320
    ADJUSTMENT SCREW FOR ADJUSTING WORK ONLY
  • 320
    HEXAGON HEAD BOLT SUPPORT TO FRAME M14X1.5X120
  • 330
    SPACER DISK TORQUE STRUT TO FRAME-TYPE INT. SUPP.
  • 330
    INDEXING PLATE FOR ADJUSTING WORK ONLY
  • 340
    NUT W FLANGE, BINDING FOR ADJUSTING WORK ONLY
  • 340
    HEXAGON NUT STEER. KNUCKLE TO TRAN. CON. ARM RIGHT M14X1,5
  • 350
    TS ADJUSTMENT SCREW FOR ADJUSTING WORK ONLY
  • 370
    NUT TRANSVERSE CONTROL ARM TO INTEGRAL CARRIER, RIGHT M14X1.5
  • 400
    SUPPORTING STRUT LEFT
  • 400
    SUPPORTING STRUT RIGHT
  • 410
    BRACKET TO SUSPENSION STRUT LEFT FRONT
  • 410
    BRACKET TO SUSPENSION STRUT FRONT RIGHT
  • 420
    HEXALOBULAR BOLT SUPPORTING STRUT AT BRACKET AT RIGHT BOTTOM M12X1,5X30
  • 430
    BRACKET BOTTOM RIGHT
  • 440
    HEXALOBULAR BOLT SUPPORTING STRUT AT BRACKET AT RIGHT BOTTOM M12X1,5X30
  • 450
    NUT SUPPORTING STRUT AT BRACKET AT LEFT BOTTOM M12X1.5, A 20131120
  • 450
    NUT LINKAGE TO REAR AXLE M10, J 45136320070307
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]