Поз.
Артикул
Описание
10
AXLE HOUSING REAR AXLE CENTER ASSEMBLY W/O FLANGE, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
20
HOUSING REAR AXLE HOUSING WITH DIFFERENTIAL
30
SCREW PLUG
40
SNAP RING AS REQUIRED 2.00 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 2.60 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 2.30 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 1.40 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 2.20 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 2.70 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 2.40 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 1.80 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 2.55 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 2.25 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 1.55 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 1.70 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 1.45 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 2.15 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 1.65 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 2.05 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 2.45 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 1.95 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 1.90 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 2.65 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 2.10 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 2.50 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 1.30 MM
40
SNAP RING AS REQUIRED 1.85 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 1.75 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 1.35 MM
40
SNAP RING AS REQUIRED 2.35 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 1.60 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
40
SNAP RING AS REQUIRED 1.50 MM, FROM IDENT NO. A 212245 ALSO INSTALLED ON A 187334 - A 212243 WITH CODE 867
50
TAPERED ROLLER BEARING RING GEAR BEARING
60
FUSE AS REQUIRED 4.50 MM
60
FUSE AS REQUIRED 3.70 MM
60
FUSE AS REQUIRED 4.00 MM
60
FUSE AS REQUIRED 4.20 MM
60
FUSE AS REQUIRED 4.30 MM
60
FUSE AS REQUIRED 4.45 MM
60
FUSE AS REQUIRED 4.10 MM
60
FUSE AS REQUIRED 4.40 MM
60
FUSE AS REQUIRED 3.95 MM
60
FUSE AS REQUIRED 4.05 MM
60
FUSE AS REQUIRED 4.15 MM
60
FUSE AS REQUIRED 3.80 MM
60
FUSE AS REQUIRED 3.85 MM
60
FUSE AS REQUIRED 3.60 MM
60
FUSE AS REQUIRED 3.90 MM
70
SEAL RING INTERIOR FLANGE, IMPORTANT: SEALING RING AND PROTECTIVE RING MUST ALWAYS BE EXCHANGED TOGETHER!
90
PROTECTIVE RING DRIVE SHAFT INTERIOR
100
COVER END COVER
110
HEXAGON HEAD BOLT. SCREW BRACKET TO SIDE MEMBER M10X25
300
BREATHER
310
CAP BREATHER