Поз.
Артикул
Описание
10
HEAT BOOSTER , PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE IMPORTANT! INSTALL INCLUDED ANCILLARY PART A 221 500 04 55 (OPTIMIZED AIR INTAKE) ON VEH. TO 11/2010.
10
HEATER , PART MUST BE CHECKED AFTER INSTALLATION FOR CURRENT FLASHWARE IMPORTANT! INSTALL INCLUDED ANCILLARY PART A 221 500 04 55 (OPTIMIZED AIR INTAKE) ON VEH. TO 11/2010.
10
HEATING UNIT HEATER BOOSTER, IMPORTANT! INSTALL INCLUDED ANCILLARY PART A 221 500 04 55 (OPTIMIZED AIR INTAKE) ON VEH. TO 11/2010., Replaced By: A2215008398
40
HOSE FUEL HOSE
50
CLAMP HOSE TO PUMP 9 MM - 9.5 MM
90
AIR INTAKE PIPE HEATER UNIT
93
AIR INTAKE AIR INTAKE HOSE
93
HOSE AIR INTAKE HOSE, Replaced By: A2215000455
95
EXHAUST SYSTEM HEATER UNIT
97
CLAMP EXHAUST PIPE
100
BRACKET MUFFLER
110
BRACKET HEATER UNIT, Replaced By: A2215060340
140
STICKER AT HEATER
150
FUEL LINE FUEL LINE
150
LINE FUEL LINE
160
FUEL HOSE FROM FUEL-OIL PUMP TO HEATER
170
FUEL HOSE FROM FUEL-OIL PUMP TO HEATER
180
FUEL LINE FROM FUEL-OIL PUMP TO HEATER, A 31249420091114
190
CLAMP FUEL LINE LEADING TO FEED PUMP, F 155735 EXCEPT CODE 807 ALSO INSTALLED IN VEHICLE TO F 155734 WITH CODE 808
210
FUEL LINE FRONT
210
FUEL LINE FROM FUEL-OIL PUMP TO FUEL LINE, A 30200020090930800
240
FUEL PUMP
250
BRACKET FUEL PUMP TO BRACKET
260
BRACKET FUEL-OIL PUMP
270
FUEL HOSE FUEL-OIL PUMP, TO BE ADAPTED DURING ASSEMBLY
280
LOOM TIE. CLIP
285
CLAMP HOSE TO PUMP 9 MM - 9.5 MM
290
BRACKET FUEL-OIL PUMP
300
HOSE FUEL HOSE TO FUEL HOSE 9X3 MM, ORDER BY THE METER
305
NUT MOUNTING FRAME TO SUPPORT M6
310
CLAMP FUEL LINE LEADING TO FEED PUMP, F 155735 EXCEPT CODE 807 ALSO INSTALLED IN VEHICLE TO F 155734 WITH CODE 808
315
COVER FUEL-OIL PUMP
320
NUT MOUNTING FRAME TO SUPPORT M6
350
WIRING HARNESS STATIONARY HEATER FUEL METERING PUMP
900
PIN BUSHING HOUSING INDICATOR SWITCH,POWER TAKE-OFF S23.2/.3, 2 PIN
901
CORE BUNDLE SEALING. WIRE SEAL WITHE 1.0-2.5 MM2, PIN 57 - 62
901
CONTACT SPRING. PIN BUSHING LESS DETENT,BUT WITH CATCH FOR HOUSING 1.5-2.5 MM2, PIN 57 - 62