1. Главная
  2. Mercedes
  3. CAR
  4. E 240 4MATIC
  5. 211.280
  6. 47 FUEL SYSTEM
  7. 015 FUEL TANK WITH ATTACHMENT PARTS

Mercedes A2114704094 - НАСОС БАКА

E 240 4MATIC 211.280
47 FUEL SYSTEM - 015 FUEL TANK WITH ATTACHMENT PARTS
  • Поз.
    Артикул
    Описание
  • 10
    FUEL TANK
  • 10
    FUEL TANK80L, FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. A 23178020030131, Replaced By: A2114702402
  • 10
    FUEL TANK70L, Replaced By: A2114702302
  • 10
    FUEL TANK80L, Replaced By: A2114700602
  • 10
    FUEL TANK70L, Replaced By: A2114700602
  • 10
    FUEL TANK70L
  • 20
    SUCTION LINE REFUELLING VENT LINE TO FUEL TANK
  • 20
    BREATHER PIPE REFUELLING VENT LINE TO FUEL TANK
  • 25
    GROMMET TO FUEL TANK
  • 30
    BREATHER PIPE SERVICE VENT LINE TO FUEL TANK
  • 30
    BREATHER PIPE SERVICE VENT LINE TO FUEL TANK, Replaced By: A2114712215
  • 35
    HOSE FUEL LINE TO TANK 13.5 X 7.5 MM, ORDER BY THE METER
  • 35
    HOSE FROM FEED LINE TO FILTER 240 MM
  • 40
    HOSE FROM FEED LINE TO FILTER 240 MM
  • 40
    FUEL DELIVERY MODULE WITH FLUID LEVEL SENSOR, Replaced By: A2114702994, +001A2114710141
  • 40
    FUEL DELIVERY MODULE FUEL
  • 40
    DELIVERY UNIT FUEL
  • 45
    PRESSURE SENSOR
  • 55
    DELIVERY UNIT WITH FLUID LEVEL SENSOR
  • 55
    MOUNTING PLATE WITH FUEL LEVEL SENSOR & INTEGRATED FUEL FILTER, Replaced By: A2114703994, +001A2114710241
  • 55
    MOUNTING PLATE WITH FUEL LEVEL SENSOR & INTEGRATED FUEL FILTER, Replaced By: A2114704094, +001A2114400507, +001A2114710241
  • 55
    DELIVERY UNIT WITH FLUID LEVEL SENSOR
  • 60
    TENSIONING STRAP TANK ATTACHMENT, A 10457520070111
  • 60
    TENSIONING STRAP TANK ATTACHMENT, A 10457620070111
  • 65
    BOLT ATTACHMENT STRAP M8X18
  • 70
    SEAL RING
  • 70
    SEAL RING MAINTENANCE OPENING, Replaced By: A2034710379
  • 70
    SEALING RING MAINTENANCE OPENING, Replaced By: A2114710579
  • 80
    NUT MAINTENANCE OPENING
  • 85
    PLUG TO HEATER BOOSTER NIPPLE
  • 90
    BUSHING
  • 95
    CLAMP HOSE TO PUMP 9 MM - 9.5 MM
  • 100
    RUBBER SLEEVE , A 74703120041029 E 01999920070101
  • 110
    RUBBER SLEEVE
  • 120
    WASHER BRACKET TO FENDER,K 104588
  • 130
    HEXAGON NUT. NUT SPARE WHEEL CARRIER TO REAR END DOOR
  • 130
    HEXAGON NUT
  • 140
    FILLER NECK FUEL TANK
  • 140
    FILLER NECK FUEL TANK
  • 140
    TANK FILLER NECK FUEL TANK, Replaced By: A2114703420
  • 140
    FILLER NECK FUEL TANK
  • 150
    HOSE FILLER NECK TO CHARCOAL FILTER
  • 155
    HOSE FROM FEED LINE TO FILTER 240 MM
  • 158
    HOSE CLAMP HOSE ATTACHMENT
  • 160
    COVER BELOW FUEL TANK
  • 165
    HEXALOBULAR BOLT. SCREW BRACKET TO SUPPORT M5 X 12
  • 168
    WASHER AIR VENT FASTENING
  • 190
    LINE SERVICE VENTILATION LINE BETWEEN FILLER NECK AND TANK, LEFT
  • 190
    LINE SERVICE VENT LINE BETWEEN FILLER NECK AND TANK, RIGHT
  • 192
    HOSE FUEL LINE TO TANK 13.5 X 7.5 MM, ORDER BY THE METER
  • 192
    HOSE FROM FEED LINE TO FILTER 240 MM
  • 195
    LINE SERVICE VENT LINE BETWEEN FILLER NECK AND TANK
  • 195
    VENT LINE SERVICE VENT LINE BETWEEN FILLER NECK AND TANK, Replaced By: A2114705364
  • 195
    LINE SERVICE VENT LINE BETWEEN FILLER NECK AND TANK
  • 196
    GROMMET TO FUEL TANK
  • 197
    CLAMP VENT LINE BETWEEN FILLER NECK AND TANK 26-29,5MM
  • 198
    NUT COVERING TO CAB FIRE WALL
  • 200
    HOSE FILLER PIPE TO FUEL TANK, Replaced By: A2114768926
  • 200
    HOSE FILLER PIPE TO FUEL TANK, FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. A 04202320050726, Replaced By: A2114769026
  • 200
    HOSE FILLER PIPE TO FUEL TANK, A 04202320050726, Replaced By: A2114766826
  • 200
    HOSE FILLER PIPE TO FUEL TANK
  • 200
    HOSE FILLER PIPE TO FUEL TANK
  • 210
    HOSE CLAMP HOSE ATTACHMENT
  • 220
    CLAMP SUCTION LINE TO OIL PUMP 40-60X13 MM
  • 230
    CLAMP SUCTION LINE TO OIL PUMP 40-60X13 MM
  • 245
    CLAMP VENT LINE BETWEEN FILLER NECK AND TANK 26-29,5MM
  • 280
    BOLTM6X18
  • 290
    FILLER CAP , J 75730620090630
  • 290
    FILLER CAP TANK FILLER NECK, E 02000020070101802 A 17199120010928802
  • 295
    SEAL RING FILLER CAP TO FILLER NECK
  • 295
    SEAL RING FILLER CAP
  • 300
    EXPANSION RIVET. RIVET
  • 310
    GROMMET TANK FILLER NECK
  • 315
    LINE TANK BREATHING
  • 350
    HOSE CLAMP HOSE FASTENING
  • 360
    BRACKET VENT LINE TO FILLER NECK
  • 370
    BRACKET VENT LINE TO LONGITUDINAL MEMBER
  • 400
    BRACKET ADAPTER:
  • 450
    HOSE CLAMP HOSE ATTACHMENT
  • 700
    CLUTCH. PIN BUSHING HOUSING SIREN
  • 710
    PLUG PLUG CONNECTION FOR FUEL PUMP WIRING HARNESS 5-PIN SLK2.8,X36/3, ATTN.: FROM IDENT. A 237174, F 177685, R 028782 TO IDENT. A 30 4093, F 232212, R 045744, MIXED INSTALLATION POSSIBLE NOTE CONTACTING, NOT VALID FOR 4-PIN CONNECTOR
  • 750
    REP.SET CONTACT. CABLE HARNESS REPAIR SOLUTION CONTACTING 0.75 MM2, 203 A 237174 203 F 177685 203 R 028782 210 B 438527 210 X 065665 901-904 R 337627 638 246706 SEE CHASSIS PARTS KIT FOR "FROM VIN" NO. VERBINDER MUESSEN ENTSPRECHEND DEM GESAMT ZU VERBINDENDEN LEITUNGSQUERSCHNITT MITBESTELLT WERDEN. REPARATURANLEITUNG SIEHE WIS LOETENDHUELSEN: A 001 546 99 41GRUEN 0,7 - 2,4 MM2 A 002 546 00 41ROT 2,0 - 4,0 MM2 A 002 546 01 41BLAU3,5 - 8,0 MM2 A 002 546 11 41GELB7,5 - 12,0 MM2 STOSSVERBINDER: A 002 546 13 410,5 MM2 A 002 546 14 410,8 MM2 A 002 546 15 411,3 MM2 A 002 546 16 412,0 MM2
  • 750
    REP.SET CONTACT REPAIR SOLUTION CONTACTING 0.5 MM2, VERBINDER MUESSEN ENTSPRECHEND DEM GESAMT ZU VERBINDENDEN LEITUNGSQUERSCHNITT MITBESTELLT WERDEN. REPARATURANLEITUNG SIEHE WIS LOETENDHUELSEN: A 001 546 99 41GRUEN 0,7 - 2,4 MM2 A 002 546 00 41ROT 2,0 - 4,0 MM2 A 002 546 01 41BLAU3,5 - 8,0 MM2 A 002 546 11 41GELB7,5 - 12,0 MM2 STOSSVERBINDER: A 002 546 13 410,5 MM2 A 002 546 14 410,8 MM2 A 002 546 15 411,3 MM2 A 002 546 16 412,0 MM2
  • 760
    ELECTRICAL LINE1.5 MM2 SLK2.8, CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS.SOLDER CONNECTOR SLEEVES:TOTAL WIRE CROSS-SECTION: A 001 546 99 41GREEN0.7 -2.4 MM2 A 002 546 00 41RED2.0 -4.0 MM2 A 002 546 01 41BLUE 3.5 -8.0 MM2 A 002 546 11 41YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2
  • 760
    REP.SET CONTACT SAM CONTROL UNIT 2.5 MM2 SLK,N10, CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS.SOLDER CONNECTOR SLEEVES:TOTAL WIRE CROSS-SECTION: A 001 546 99 41GREEN0.7 -2.4 MM2 A 002 546 00 41RED2.0 -4.0 MM2 A 002 546 01 41BLUE 3.5 -8.0 MM2 A 002 546 11 41YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2
  • 760
    REP.SET CONTACT0.75 MM2 SLK2.8, CONNECTORS MUST ALSO BE ORDERED IN ACC. WITH THE TOTAL CABLE C ROSS-SECTION TO BE CONNECTED. SEE WIS FOR REPAIR INSTRUCTIONS.SOLDER CONNECTOR SLEEVES:TOTAL WIRE CROSS-SECTION: A 001 546 99 41GREEN0.7 -2.4 MM2 A 002 546 00 41RED2.0 -4.0 MM2 A 002 546 01 41BLUE 3.5 -8.0 MM2 A 002 546 11 41YELLOW 7.5 - 12.0 MM2 BUTT JOINT: A 002 546 13 41 0.5 MM2 A 002 546 14 41 0.8 MM2 A 002 546 15 41 1.3 MM2 A 002 546 16 41 2.0 MM2
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]