1. Главная
  2. Mercedes
  3. TRUCK
  4. 1613
  5. 385.006
  6. 41 PROPELLER SHAFT
  7. 001 PROPELLER SHAFT USED WITH ALLISON TRANSMISSION

Mercedes A6744100702 - КАРДАННЫЙ ВАЛ

1613 385.006
41 PROPELLER SHAFT - 001 PROPELLER SHAFT USED WITH ALLISON TRANSMISSION
  • Поз.
    Артикул
    Описание
  • 2
    VIBRATION DAMPER VIBRATION DAMPER END
  • 5
    PROPELLER SHAFT FROM TRANSMISSION TO TRANSFER CASE, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 5
    PROPELLER SHAFT , WITH BOOT, Replaced By: A6744100702
  • 5
    PROPELLER SHAFT FROM CLUTCH TO TRANSMISSION 1024 MM
  • 5
    PROPELLER SHAFT FROM CLUTCH TO TRANSMISSION 1029 MM, LESS BOOT PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 10
    DRIVE FLANGE
  • 10
    DRIVE FLANGE
  • 15
    UNIVERSAL JOINT CROSS , Replaced By: A0004104031
  • 15
    UNIVERSAL JOINT CROSS WITH BUSHINGS
  • 15
    UNIVERSAL JOINT CROSS WITH BUSHINGS
  • 25
    NEEDLE SET124 PIECES, WITH BOOT
  • 35
    LOCK AS REQUIRED 2.00 MM
  • 35
    SNAP RING AS REQUIRED 2.80 MM
  • 35
    SNAP RING AS REQUIRED 2.90 MM
  • 35
    LOCK RING SHIFT LEVER BEARING
  • 35
    LOCK AS REQUIRED 1.88 MM
  • 35
    SNAP RING AS REQUIRED 2.95 MM
  • 35
    SNAP RING AS REQUIRED 2.85 MM
  • 35
    SNAP RING AS REQUIRED 3.00 MM
  • 40
    GREASE NIPPLE
  • 45
    BOOT , Replaced By: A3814100180
  • 45
    BOOT , WITH BOOT
  • 50
    WIRE RING , WITH BOOT
  • 55
    CLAMP , WITH BOOT
  • 60
    CLAMP , WITH BOOT
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO INTERMEDIATE BEARING I 619 MM,4 839393
  • 105
    PROPELLER SHAFT FROM PROPELLER SHAFT BEARING I TO PROPELLER SHAFT BEARING II 1045 MM,5 091918 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO PROPELLER SHAFT BEARING 970 MM
  • 105
    PROPELLER SHAFT FROM TELMA BRAKE TO PROPELLER SHAFT BEARING 983 MM
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO INTERMEDIATE BEARING I 1043 MM
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO PROPELLER SHAFT BEARING 1092 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO INTERMEDIATE BEARING I 1333 MM
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO INTERMEDIATE BEARING I 1375 MM
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO PROPELLER SHAFT BEARING 1387 MM
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO INTERMEDIATE BEARING I 1483 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO INTERMEDIATE BEARING I 982 MM
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO INTERMEDIATE BEARING I 1509 MM,4 839393
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO INTERMEDIATE BEARING I 1118 MM
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO INTERMEDIATE BEARING I 1486 MM
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO INTERMEDIATE BEARING I 1923 MM,5 298190
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO INTERMEDIATE BEARING I 569 MM,4 839393
  • 105
    PROPELLER SHAFT ,5 298189, Replaced By: A6164100604, +001A3854110045, +001A3894110162, +001A3839900019
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO INTERMEDIATE BEARING I 1089 MM
  • 105
    PROPELLER SHAFT ,5 091917, Replaced By: A3894101504, +001A3894100222, +001A3894110046, +001A3894110162, +001A3954130011, +001A3839900019
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO INTERMEDIATE BEARING I 1106 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 105
    PROPELLER SHAFT FROM INTERMEDIATE BEARING I TO INTERMEDIATE BEARING II 1507 MM
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO INTERMEDIATE BEARING I 1107 MM
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO INTERMEDIATE BEARING I 888 MM
  • 105
    PROPELLER SHAFT FROM TRANSMISSION TO PROPELLER SHAFT BEARING I 1468 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 110
    PROPELLER SHAFT FROM INTERMEDIATE BEARING I TO INTERMEDIATE BEARING II 1439 MM,4 914283
  • 110
    PROPELLER SHAFT FROM TRANSMISSION TO PROPELLER SHAFT BEARING 1433 MM
  • 110
    PROPELLER SHAFT FROM PROPELLER SHAFT BEARING I TO PROPELLER SHAFT BEARING II 1640 MM
  • 110
    PROPELLER SHAFT FROM INTERMEDIATE BEARING I TO INTERMEDIATE BEARING II 1599 MM
  • 110
    PROPELLER SHAFT FROM INTERMEDIATE BEARING I TO INTERMEDIATE BEARING II 1541 MM
  • 110
    PROPELLER SHAFT FROM INTERMEDIATE BEARING I TO INTERMEDIATE BEARING II 1475 MM,4 839393
  • 110
    PROPELLER SHAFT FROM INTERMEDIATE BEARING I TO INTERMEDIATE BEARING II 1609 MM,4 839393
  • 110
    PROPELLER SHAFT FROM TRANSMISSION TO INTERMEDIATE BEARING I 1486 MM
  • 110
    PROPELLER SHAFT FROM TRANSMISSION TO PROPELLER SHAFT BEARING I 1468 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 110
    PROPELLER SHAFT FROM INTERMEDIATE BEARING I TO INTERMEDIATE BEARING II 1507 MM
  • 115
    PROTECTIVE CAP FOLLOWER FLANGE, INTERMEDIATE BEARING, BALL BEARING WITH LOCK
  • 115
    PROTECTIVE CAP FOLLOWER FLANGE, INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT
  • 120
    DRIVE FLANGE
  • 120
    DRIVE FLANGE , Replaced By: A3854111711
  • 120
    DRIVE FLANGE
  • 120
    DRIVE FLANGE , Replaced By: A3894110511
  • 125
    UNIVERSAL JOINT CROSS , EXHAUST STOCK OF OLD PART NUMBERS FIRST UP TO IDENT NO. 4 292119, Replaced By: A3854100531
  • 125
    UNIVERSAL JOINT CROSS WITH BUSHINGS
  • 125
    UNIVERSAL JOINT CROSS , Replaced By: A0004101628
  • 125
    UNIVERSAL JOINT CROSS , Replaced By: A0004100231
  • 125
    UNIVERSAL JOINT CROSS , Replaced By: A6204100131
  • 125
    UNIVERSAL JOINT CROSS , Replaced By: A9734100031
  • 125
    UNIVERSAL JOINT , Replaced By: A9424100131
  • 125
    UNIVERSAL JOINT CROSS WITH BUSHINGS
  • 125
    UNIVERSAL JOINT CROSS , Replaced By: A3814100231
  • 130
    GREASE NIPPLE
  • 135
    EXPANSION PLUG ,4 292119
  • 135
    EXPANSION PLUG
  • 140
    BEARING BUSHING , Replaced By: A3854100842
  • 140
    BEARING BUSHING
  • 140
    BEARING BUSHING ,4 292119
  • 140
    BEARING BUSHING ,4 2921204 839393
  • 140
    BEARING BUSHING ,4 839394
  • 140
    BEARING BUSHING ,4 839394
  • 145
    NEEDLE , Replaced By: A3819810487
  • 145
    NEEDLE SET124 PIECES, WITH BOOT
  • 145
    NEEDLE , Replaced By: A3959810087
  • 145
    NEEDLE SET164 PIECES TO 363 410 06 31,36.25 MM
  • 150
    GASKETTO 363 410 06 31
  • 150
    SEAL RING ,4 292119
  • 155
    LOCK AS REQUIRED 1.65 MM
  • 155
    LOCK AS REQUIRED 1.90 MM
  • 155
    LOCK , Replaced By: A0069942741
  • 155
    LOCK AS REQUIRED 2.00 MM
  • 155
    LOCK , Replaced By: A0069941941
  • 155
    LOCK , Replaced By: A0069942341
  • 155
    LOCK AS REQUIRED 2.10 MM
  • 155
    LOCK AS REQUIRED 2.20 MM
  • 155
    LOCK AS REQUIRED 1.70 MM
  • 155
    LOCK AS REQUIRED 1.80 MM
  • 155
    LOCK RING AS REQUIRED 1.75 MM
  • 155
    LOCK AS REQUIRED 1.85 MM
  • 160
    HOUSING , Replaced By: A3874100010
  • 160
    REPAIR KIT PROPELLER SHAFT BEARING,5 091917
  • 162
    INTERMEDIATE BEARING , Replaced By: A6544100022, +002A6544110052
  • 162
    INTERMEDIATE BEARING PROPELLER SHAFT BEARING, INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT
  • 162
    INTERMEDIATE BEARING , Replaced By: A3894100222, +002A3894130361
  • 165
    BALL BEARING PROPELLER SHAFT BEARING,5 091917
  • 165
    BALL BEARING , INTERMEDIATE BEARING, BALL BEARING WITH LOCK
  • 165
    BALL BEARING , INTERMEDIATE BEARING, BALL BEARING WITH LOCK
  • 170
    PROTECTIVE CAP , INTERMEDIATE BEARING, BALL BEARING WITH LOCK
  • 175
    RUBBER MOUNTING PROPELLER SHAFT BEARING,5 091917
  • 176
    SNAP RING , INTERMEDIATE BEARING, BALL BEARING WITH LOCK
  • 178
    PROTECTIVE CAP , INTERMEDIATE BEARING, BALL BEARING WITH LOCK
  • 180
    FLANGE PROPELLER SHAFT BEARING
  • 180
    CENTERING FLANGE PROPELLER SHAFT BEARING,5 091917
  • 180
    CENTERING FLANGE , Replaced By: A3894110046, +001A3894130161, +001A3894130361
  • 182
    PROTECTIVE CAP FOLLOWER FLANGE, INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT
  • 182
    PROTECTIVE CAP FOLLOWER FLANGE, INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT
  • 185
    CENTERING FLANGE INTERMEDIATE BEARING,5 298189
  • 185
    FLANGE PROPELLER SHAFT BEARING
  • 185
    CENTERING FLANGE , Replaced By: A3854110045
  • 190
    NUT , Replaced By: A3853510672
  • 190
    NUT PROPELLER SHAFT TO FOLLOWER FLANGE,5 091917
  • 192
    PROTECTIVE CAP FOLLOWER FLANGE, INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT
  • 192
    PROTECTIVE CAP FOLLOWER FLANGE, INTERMEDIATE BEARING, BALL BEARING WITH LOCK
  • 195
    NUT FOLLOWER FLANGE TO PROPELLER SHAFT
  • 195
    NUT FOLLOWER FLANGE TO PROPELLER SHAFT TO 384 410 70 30
  • 195
    NUT COUPLING FLANGE TO DRIVE SHAFT,5 298189
  • 200
    THRUST WASHER FOLLOWER FLANGE TO PROPELLER SHAFT
  • 205
    SCREW FOLLOWER FLANGE TO PROPELLER SHAFT
  • 210
    INTERMEDIATE BEARING , INTERMEDIATE BEARING, BALL BEARING WITH LOCK, Replaced By: A3854101722, +002A3854130461, +004N000933010105
  • 210
    INTERMEDIATE BEARING , Replaced By: A9734100022, +002A9734110052
  • 210
    INTERMEDIATE BEARING PROPELLER SHAFT BEARING, INTERMEDIATE BEARING, BALL BEARING IN RUBBER SEAT
  • 215
    BALL BEARING , Replaced By: A0079818525
  • 215
    BALL BEARING , INTERMEDIATE BEARING, BALL BEARING WITH LOCK
  • 220
    SNAP RING , INTERMEDIATE BEARING, BALL BEARING WITH LOCK
  • 225
    PROTECTIVE CAP , INTERMEDIATE BEARING, BALL BEARING WITH LOCK
  • 230
    PROPELLER SHAFT , Replaced By: A3894107601
  • 230
    PROPELLER SHAFT , Replaced By: A3854104907
  • 230
    PROPELLER SHAFT FROM TELMA BRAKE TO REAR AXLE 1670 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 230
    PROPELLER SHAFT FROM TRANSMISSION TO REAR AXLE 2034 MM
  • 230
    PROPELLER SHAFT FROM PROPELLER SHAFT BEARING II TO REAR AXLE 1545 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 230
    PROPELLER SHAFT , Replaced By: A3854104807
  • 230
    PROPELLER SHAFT FROM TRANSMISSION TO REAR AXLE 1645 MM,4 839393
  • 230
    PROPELLER SHAFT , Replaced By: A3894107801
  • 230
    PROPELLER SHAFT FROM PROPELLER SHAFT BEARING II TO REAR AXLE 1490 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 230
    PROPELLER SHAFT , Replaced By: A3894107601
  • 230
    PROPELLER SHAFT , Replaced By: A3854107307
  • 230
    PROPELLER SHAFT FROM PROPELLER SHAFT BEARING I TO REAR AXLE 1715 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT , Replaced By: A3854104907
  • 240
    PROPELLER SHAFT FROM TELMA BRAKE TO REAR AXLE 1130 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT , Replaced By: A3854104507
  • 240
    PROPELLER SHAFT FROM PROPELLER SHAFT BEARING TO REAR AXLE 1580 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT , Replaced By: A3894107901
  • 240
    PROPELLER SHAFT , Replaced By: A3854109307
  • 240
    PROPELLER SHAFT , Replaced By: A3894101802
  • 240
    PROPELLER SHAFT FROM TELMA BRAKE TO REAR AXLE 1670 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT , Replaced By: A3854104807
  • 240
    PROPELLER SHAFT FROM INTERMEDIATE BEARING I TO REAR AXLE 1291 MM
  • 240
    PROPELLER SHAFT FROM PROPELLER SHAFT BEARING TO REAR AXLE I 1648 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT FROM PROPELLER SHAFT BEARING II TO REAR AXLE 1490 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT , Replaced By: A3854106007
  • 240
    PROPELLER SHAFT FROM INTERMEDIATE BEARING II TO REAR AXLE 970 MM,4 839393 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT , Replaced By: A3974100107
  • 240
    PROPELLER SHAFT , Replaced By: A3894101702
  • 240
    PROPELLER SHAFT , Replaced By: A3894107801
  • 240
    PROPELLER SHAFT FROM TRANSMISSION TO TELMA BRAKE 918 MM, FROM 09.94,VERSION B UP TO 08.96 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT FROM TRANSFER CASE TO REAR AXLE 1450 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT , Replaced By: A3894101902
  • 240
    PROPELLER SHAFT FROM INTERMEDIATE BEARING II TO REAR AXLE 1222 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT , Replaced By: A3894101402
  • 240
    PROPELLER SHAFT FROM INTERMEDIATE BEARING I TO REAR AXLE 1492 MM
  • 240
    PROPELLER SHAFT FROM PROPELLER SHAFT BEARING I TO REAR AXLE 1520 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT FROM TRANSMISSION TO REAR AXLE I 1346 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT , Replaced By: A3854103007
  • 240
    PROPELLER SHAFT FROM PROPELLER SHAFT BEARING TO REAR AXLE 1402 MM,5 350658 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT FROM INTERMEDIATE BEARING II TO REAR AXLE 1328 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT FROM PROPELLER SHAFT BEARING TO REAR AXLE 1750 MM
  • 240
    PROPELLER SHAFT FROM PROPELLER SHAFT BEARING TO REAR AXLE I 1250 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT FROM INTERMEDIATE BEARING II TO REAR AXLE 1000 MM,4 694050
  • 240
    PROPELLER SHAFT , Replaced By: A3894107601
  • 240
    PROPELLER SHAFT , THIS NOTE OF REPLACEMENT APPLIES ONLY TO THE ITEM LISTED OPPOSITE, Replaced By: A3853105307
  • 240
    PROPELLER SHAFT FROM PROPELLER SHAFT BEARING II TO REAR AXLE 1400 MM
  • 240
    PROPELLER SHAFT FROM INTERMEDIATE BEARING II TO REAR AXLE 1082 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT FROM TRANSFER CASE TO REAR AXLE 1085 MM
  • 240
    PROPELLER SHAFT FROM INTERMEDIATE BEARING I TO REAR AXLE 1505 MM,4 839393 PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT FROM PROPELLER SHAFT BEARING II TO REAR AXLE 1545 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT FROM INTERMEDIATE BEARING I TO REAR AXLE 821 MM
  • 240
    PROPELLER SHAFT FROM PROPELLER SHAFT BEARING II TO REAR AXLE 1189 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT , Replaced By: A3894107601
  • 240
    PROPELLER SHAFT , Replaced By: A3854104302
  • 240
    PROPELLER SHAFT FROM INTERMEDIATE BEARING I TO REAR AXLE 1050 MM
  • 240
    PROPELLER SHAFT FROM INTERMEDIATE BEARING I TO REAR AXLE 1791 MM, PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
  • 240
    PROPELLER SHAFT , Replaced By: A3894106301
  • 240
    PROPELLER SHAFT , Replaced By: A3894101302
  • 240
    PROPELLER SHAFT FROM INTERMEDIATE BEARING I TO REAR AXLE 1725 MM,4 839393
  • 245
    DRIVE FLANGE
  • 245
    DRIVE FLANGE , Replaced By: A3894110511
  • 245
    DRIVE FLANGE , Replaced By: A3854111711
  • 245
    DRIVE FLANGE
С любыми вопросами обращайтесь по телефонам
Ответим на Ваши вопросы по электронной почте [email protected]